Replacing a bathroom tap is a relatively easy DIY project that can save you a lot of money. With the right tools and instructions, you can have the new tap installed in no time.
Before you start
Before you start replacing your bathroom tap, there are a few things you need to do to prepare. First, gather all of the tools and materials you will need. This will vary depending on the type of tap you are replacing, but some common tools include a wrench, a screwdriver, and a level. You will also need the new tap, as well as any necessary washers or gaskets.
Once you have gathered your tools and materials, you need to turn off the water supply to the tap. This is usually done by turning a valve located under the sink. Once the water is turned off, you can open the tap and drain the water from the pipes.
Removing the old bathroom tap
Once the water is drained, you can start removing the old tap. The first step is to remove the handle. This is usually done by unscrewing it with a wrench. Once the handle is removed, you can then remove the spout. This is usually done by unscrewing it with a wrench.
Once the spout is removed, you can then remove the body of the tap. This is usually done by unscrewing it with a wrench. Once the body of the tap is removed, you can then remove the washers and gaskets.
Installing the new tap
Now that the old tap is removed, you can install the new tap. The first step is to install the body of the tap. This is usually done by screwing it into place with a wrench. Once the body of the tap is in place, you can then install the washers and gaskets.
Once the washers and gaskets are in place, you can then install the spout. This is usually done by screwing it into place with a wrench. Once the spout is in place, you can then install the handle. This is usually done by screwing it into place with a wrench.
Turning on the water
Once the new tap is installed, you can turn on the water supply to the tap. This is usually done by turning a valve located under the sink. Once the water is turned on, you can open the tap and check for leaks. If there are any leaks, tighten the connections until the leaks stop.
Tips
Here are a few tips for replacing a bathroom tap:
- Make sure you have the right tools and materials before you start.
- Turn off the water supply to the tap before you start working.
- Drain the water from the pipes before you remove the old tap.
- Be careful not to damage the new tap when you are installing it.
- Turn on the water supply to the tap and check for leaks after you are finished installing the new tap.
Safety
When replacing a bathroom tap, it is important to take safety precautions. Always wear safety glasses when working with tools, and be careful not to cut yourself on sharp edges. If you are not comfortable replacing the tap yourself, you can always call a plumber.
